newbe
11/9/2007 7:29:29 AM
heater controll only works on defrost . when i put the controll on floor i get nothing? any ideas?!
moe
11/9/2007 11:30:48 AM
sounds like the mode door actuator is inop.its a little motor that moves defrost or heat mode door when it is selected.moe
newbe
11/9/2007 11:55:02 AM
thanks moe
would this be a hard fix and or is ther a fuse i should check first?
moe
11/9/2007 12:00:09 PM
its not that easy.back in the day there was a problem with a vac line that went thru the fire wall to your ac/heater box.not sure if your newer car still uses this method .wouldn't hurt to look under hood for broken vac line .pretty sure you don't have this set up.moe i'll look for picture of what your dealing with inder your dash. (mode door)
Cordoba Man
11/10/2007 10:39:39 AM
So they're motors now? Hmm! So that's why it doesn't change when going up a steep hill or stop the engine. My older ones always defaulted to defrost when loosing manifold vacuum.
CHRYSLER TECH
11/11/2007 1:22:52 PM
been motors for a long time now. Some systems have been vac plus motors but most everything now is motors.
moe
11/11/2007 6:14:01 PM
this is one tuff job.and costly.moe
newbe
11/18/2007 7:15:43 AM
moe, thanks for your help. heater is now working.sorry it took so long to thank you but there was serious illness in family.
moe
11/18/2007 8:19:54 AM
sorry to hear that.hope every thing is ok now.family first.moe
