MICHAELP4514
8/17/2008 11:53:50 AM
PO441 IS THE DIAGNOSTIC TROUBLE CODE ON MY 2004 CHRYSLER 300M SPECIAL. THE CHECK ENGINE LIGHT IS ON BUT THE AUTO RUNS PERFECT. I CHECK THE REFERENCES AND
FIND OUT WHAT PO441 CODE IS. NOW I NEED TO KNOW WHAT CAN I CHECK AND/OR REPAIR WITHOUT TAKING IT TO A SHOP AND ALSO WHERE ARE THESE PARTS LOCATED IN THE AUTO. THANKS.............
MICHAELP4514
8/17/2008 11:56:25 AM
MY LIGHTER DO NOT WORK ON MY 2004 CHRYSLER 300M SPECIAL. CAN I CHANGE IT MYSELF AND HOW DO I CHANGE IT.
MICHAELP4514
8/17/2008 11:57:24 AM
WHAT BRAND OF TIRES ARE RECOMMENDED FOR THE 2004 CHRYSLER 300M SPECIAL.
CHRYSLER TECH
8/17/2008 10:16:17 PM
P0441-EVAP PURGE SYSTEM PERFORMANCE
POSSIBLE CAUSES
GOOD TRIP EQUAL TO ZERO
NVLD SWITCH OPERATION
VEHICLE HISTORY AND SERVICE BULLETIN INVESTIGATION
CHECKING EVAP PURGE SOLENOID FUNCTIONALITY
EVAP PURGE SOLENOID VACUUM SUPPLY
VERIFY NVLD OPERATION
dcotter0579
9/17/2008 9:07:30 AM
As for the lighter, check the fuse first. If the fuse is good, check for voltage at the lighter socket. If there''s voltage, then you can probably fix it by replacing the lighter itself. Any auto parts store can sell you one, or go to the dealer for a replacement.
If the fuse is good but there''s no voltage at the socket, look for a wiring problem.
The evap system collects fumes from the gas tank and holds them. When you drive, the system is supposed to release the fumes into the intake manifold for combustion. The code you got says it is not detecting flow from the system into the intake manifold. Could be lots of things. Bad solenoid, vacuum leak, bad sensor, bad wiring.
Might be time to have a pro look at it.
