Installing projector headlights for 300

What do i have to do to install my new headlights? Do i have to take off the whole front end?? please help!

REMOVAL - 300C AND MAGNUM

1. Disconnect and isolate the battery negative cable.
   
2. Open hood and remove the two upper headlamp unit mounting screws.
   
3. The two upper retaining screws (1) are located just in front of the upper radiator cross-member.
   NOTE: It may be necessary to loosen the side of the fascia to access the lower headlamp unit retaining screw (Refer to 13 - FRAME & BUMPERS/BUMPERS/FRONT FASCIA - REMOVAL).
   
4. Remove the one lower headlamp unit retaining screw.
   
5. Disconnect the electrical connectors.
   
6. Separate headlamp u

Thumbnail Image



Thumbnail Image



Thumbnail Image



Thumbnail Image

where do i go to find out how to take the front end off?

try it with out  I have done it  u can lower it a bit with out taking it all off

im having trouble getting the bottom screw off..how could i get in there without takeing the whole thing off?

take off the top half and bend it down enough to get asccess