Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Ok, i have a huge problem atm with my concorde, I was driving home the other morning from work, And the car suddenly quit, i figured it was the crank sensor but its not. I hooked the computer up and had RPM's so that rules that out, I have spark, Fuel pressure. No power to the cam sensor. The codes i have recived are P072 P0292 P0201 P1391, I started testing fuses, I have no power to the bottom right fuses, So i jumped it with a wire. It feels like it wants to turn over and start but it starts miss firing like a mofo. I think its the ECM, If anyone has some Suggestions please post, Also if you have a diagram of the ECM, Please post that too thanks
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
Does the PCM power the Coils and crank and cam sensor along with the fuse box? I dont have power in the cam sensor or half the fuse box. Could that be what is all messed up?
01 Concorde 3.2
thanks
