Chrysler Town & Country 2001 - European Radio Frequency Step Change
#1
05-30-2011, 02:38 PM
Chrysler Town & Country 2001 - European Radio Frequency Step Change
Hello,
Does anyone know how to change the frequency steps of the fm radio in a Chrysler Town & Country or alike. The problem is here in Europe they use a frequency step of 0.1MHz instead of 0.2MHz. This means that I'm unable to listen to a lot of radio stations.
I found the following instruction on the web, but they are not for the 4G generation. I don't have a SEL button.
Thanks!
Does anyone know how to change the frequency steps of the fm radio in a Chrysler Town & Country or alike. The problem is here in Europe they use a frequency step of 0.1MHz instead of 0.2MHz. This means that I'm unable to listen to a lot of radio stations.
I found the following instruction on the web, but they are not for the 4G generation. I don't have a SEL button.
1) Turn radio on.
2) Radio should be in FM mode.
3) Press SET button.
4) Press SEL button.
5) Press station memory set button one 5 times. Radio will reset to lowest AM frequency.
6) To return to North American reception repeat steps 1 - 5 or disconnect ignition off power source to radio.
2) Radio should be in FM mode.
3) Press SET button.
4) Press SEL button.
5) Press station memory set button one 5 times. Radio will reset to lowest AM frequency.
6) To return to North American reception repeat steps 1 - 5 or disconnect ignition off power source to radio.
Thread
Thread Starter
Forum
Replies
Last Post
ietk
Chrysler Pacifica
11
11-09-2011 11:31 AM
lucamilano1970
Chrysler Voyager & Town & Country
0
09-08-2008 04:49 PM
lucamilano1970
Audio/Visual Electronics
0
09-08-2008 04:33 PM
Midnight 85
Brand News, Concepts & Rumors
0
02-21-2006 10:01 AM
