PT 06 Wont start - Chrysler Forum

PjAlmer · #1 12-20-2010, 03:27 PM

HELP!!! I was driving my Cruiser and I stopped at the stop light like 9 blocks from my house and my check engine light started flashing and the car just died. Power still worked, sounded like it wanted to start but wouldnt. Changed spark plugs and cam shaft sensor. Still sounds like it wants to start but wont turn over. No clicking or anything, just wont start. can anyone help me?

This ad is not displayed to registered members.
Register your free account today and become a member on ChryslerForum!

CHRYSLER TECH · #2 12-20-2010, 10:37 PM

check your timing belt check the codes in the computer

PjAlmer · #3 12-21-2010, 09:14 AM

We checked the timing belt and it is fine. Do you think possibly it could be a clogged fuel filter?

CHRYSLER TECH · #4 12-21-2010, 10:09 AM

no a fuel filter wont be doing this.

PjAlmer · #5 12-21-2010, 12:46 PM

well when we changed the cam sensor it still wont start, we took out the cam sensor and could smell gas when we tried to start it. but It still wont start.

Otherwise when we tried to start it we could not smell gas

CHRYSLER TECH · #6 12-21-2010, 01:06 PM

as i asked b4 what are the codes in the computer how did u check that the timing belt is good?

PjAlmer · #7 01-05-2011, 11:53 AM

I wanted to let you know that I found out what was wrong with my car. Someone vandalized it and poured soda or some kind of syurp in my gas tank. Thanks for the help but My car is ruined.

CHRYSLER TECH · #8 01-05-2011, 09:06 PM

ouch humm replace anything that has to do with the fuel it should be ok take it up with your insurance