Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
I have a 2004 sebring convertable with 2.7 v6. Last night was bad rain and window was down, so interior got wet.
Car started and I went to work. This morning, No spark. like dead battery. but battery is fine. Headlights work, some dash lights work, power windows work, no radio, no gages, and steering wheel wont lock.
when you turn ignition you really dont hear starter click but do hear a small clicking noise.
fuses seem ok. Brother changed out ignition switch but nothing.
Any ideas?
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
Your best bet is going to be to get a couple of box fans and leave them to run for a day or two blowing under the seats/dash. I don't know about the specifically about the Sebring, but there are usually modules and stuff under the seats that don't like water.
Well it turned out to be a blown fuse 20 amp for alternator.. but a few weeks later the same thing happened again this time it was the 20 amp starter fuse so i think i will track down starter wiring see if there is a short.
have a new code showing on diagnostic...p0128 wonder if they are related.