Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
My Water Pump was diagnosed with a small leak a few months back. I learned that the labor to replace this part was going to be very high (600 to 700) since the whole motor had to be pulled up and so I've postponed such replacement.
Now, due to a literally fender bender, I need a new passenger side fender. I questioned my mechanic and got the impression that the water pump is easily accessible once the fender is removed. Is this really the case? I'd love to kill 2 birds with one stone here.
Lastly, my passenger side mirror (the actual mirror in the housing) feels loose in the vertical direction in the housing. The motor controls it sideways only. Can i push that back until it snaps or can I maybe open the housing and see what got lose in this accident?
Thanks in advance.
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
a fender wont have any bearing on doing to the water pump U still have the frame of the car there.
__________________
Dealer trained Tech 15 years Now Proud Owner operator Kevin's Mobile Repair in ATLANTA. Repairing Chrysler,Dodge and Jeep KKeller608@aol.com http://kevinsmobilerepair.com
Water Pump + Body Work + Mirror
