Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
My car is a -06 Voyager 2.8 CRD Auto. Now it is revealed that: the gear selector does not show the P-and N-positions, ie they do not appear in the square. When the switch is a P-position, so does not appear square, but when you turn off the car as it moves to the R-square position. I turned off my car with the transmission in D position. Today parked with the handbrake on a car uphill, when I came to forage after 1h, gear selector seemed to be the R-position. Started only 6-7 cycles. When started, it is the R-position of the square is flashing all the time. Admonish you to be unaware of what to do.
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
Automatic Gearbox problem
