Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Hi Everyone
I am a new member and wish to get your help with my Voyager 2.5 crd 2001 ABS warning light which stays on. I have done a resistance check on two sensors, right front and right rear and both give a reading of about 5 mega ohms. Kindly let me know whether this is within the range expected. If not what the rough value?
While the two sensors were disconnected I have turned the ignition on and messured the voltage on each of the sensor cables and they read 11volts.
I have tried to look for the control unit to enable checking the functionality of all 4 wheel speed sensors but no joy. Please point me in the right direction as to where it is located.
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
Voyager ABS light stays on
