Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Have reached the point where the water pump on my 3.3 petrol Grand Voyager needs to be replaced.
Ordered a new one from fleabay and it has turned up complete with rubber O ring (presumably to fit into the nicely machined groove on the inside of said water pump), but with no gasket.
Now this means one of two things... either the pump is designed to be fitted without a gasket (unlike any other water pump I have dealt with) or the supplier has left it out of the package on purpose... knowing that we can not get water pump gaskets seperate from the water pumps in this country... or else the pump is supposed to fitted using RTV instead of a gasket...
Thoughts?
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
__________________
Programming solutions for vehicle tracking and anti theft... http://www.pebbletrack.com
__________________
Dealer trained Tech 15 years Now Proud Owner operator Kevin's Mobile Repair in ATLANTA. Repairing Chrysler,Dodge and Jeep KKeller608@aol.com http://kevinsmobilerepair.com
Water Pump Question
