Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
Hello all,
In Dec. 2010, I was able to get this car started after replacing the wires and spark plugs. At the time I planned to replace the distributor, but after removing everything to get access to it, I could not get it out. Anyway, I put it back together with new plugs, wires, cap and rotor and it ran well until yesterday. Now its back to no start. I cannot detect a spark at the plug. The plugs lookgood, any suggestions on where to check next? I thank you.
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
1998 Sebring Conv. won't start, again
