Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
I would like some help in removing the radio in my new 2011 Town & Counrty. I have the nav unit. It has a black plastic bezel around the radio unit but I cannot figure out how to take it off and get to the 4 screws holding the radio in.
Any help appreciated?
Thanks, Klupcheck
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
On a 2011, you remove the trim around the radio face with a trim stick then there are 4 screws holding the radio unit in. Pretty simple compared to a 2010...
Thanks for the reply! I figured the radio bezel had to come off and the 4 screws would be behind it. I don't have a trim stick and did not want to break the black plastic bezel around the radio.
The 2009 was much harder to remove.
Thanks, Klupcheck
Quote:
Originally Posted by TNtech
On a 2011, you remove the trim around the radio face with a trim stick then there are 4 screws holding the radio unit in. Pretty simple compared to a 2010...
__________________ Professional Mechanic since 1985, Chrysler Dealership Technician since 1999.
We aren't ALL thieves, We're Just trying to make a living like everyone else , So Have A Heart.
If You wanted Dealership Service, You wouldnt Go To "Discount Quik Lube" , So why did you Walk into a dealership Expecting QUIK LUBE PRICING????
Ma'am, It costs so much money, because ...I CAN, And you CANNOT, And It matters Not to Me, Because I HAVE A RIDE HOME.
3/36 Does not mean 3 years and a day, or 36,001
Radio Removal 2011 Town & Country Limited
