Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
I have a 2003 pt that won't start. I replaced the plugs, wires,coil, crankshaft position sensor, camshaft position sensor. The timing belt was changed a month ago and car ran fine then. It just quit one day. Fuel pressure is 100 to 115 psi. I have spark. In my day fuel and spark did the trick. The oil is ok and oil pressure is fine.
Please help before I burn it!!!!!!!!!!!!!!
This ad is not displayed to registered members. Register your free account today and become a member on ChryslerForum!
are u sure fuel pressure is 110???? that's double what it is suppose to be.
Check for spark any codes in the computer?
__________________
Dealer trained Tech 15 years Now Proud Owner operator Kevin's Mobile Repair in ATLANTA. Repairing Chrysler,Dodge and Jeep KKeller608@aol.com http://kevinsmobilerepair.com
Thanks. The problem is the fuel pump! I poured gas into intake and it fired up. The pump runs but obviously its not getting gas. The pressure should be 55 to 65 psi but the reading was acyuially 110?????????????????
2003 pt won't start
