05 Pacifica door Module problem?

Chrysler Forum Chrysler Classifieds Photo Gallery Member List Calendars Search Sponsors
Chrysler News Forum FAQ Contact CF Chrysler Recalls TSBs Timeslips Register Login

05 Pacifica door Module problem?

Printable Version

Chrysler Forums >> Chrysler Vehicles >> Chrysler Pacifica >> 05 Pacifica door Module problem?

Page: [1]

Message

<< Older Topic Newer Topic >>

05 Pacifica door Module problem? - 4/14/2008 11:41:52 AM

e49735

Posts: 7
Joined: 4/10/2008
Status: offline

Hi,
I have an 05 Pac, with power seats(both sides)...power locks/windows(passenger side only), intermittently not working.....
My vehicle was built on 9/11/2004, and a service mgr. locally gave me a TSB that refers to replacing a door module and door handle (electrostatic discharge problem) on drivers' side.

anyone with a similar experience? If I disconnect the battery, and reconnect it seems to bring back the power seat controls, sometimes the power windows, but not the locks.
any other thoughts...could it be covered by warranty, somehow because of a "known" problem? If not, I might get a module and replace it myself if there is a good description somewhere on taking off the interior door panel to get at the module.

ps I also have a check engine light and GASCAP indicator coming on....replaced the cap, and had the car smoke tested, etc, at a dealer to find no leaks.

could somehow these be related to the above???
thanks,
Terry

Post #: 1

RE: 05 Pacifica door Module problem? - 4/14/2008 7:59:33 PM

rrings

Posts: 4
Joined: 4/14/2008
Status: offline

Have seen this problem posted before. go to search and type: power seats dont work.

(in reply to e49735)

Post #: 2

RE: 05 Pacifica door Module problem? - 7/14/2008 7:54:32 AM

snpmich

Posts: 2
Joined: 7/14/2008
Status: offline

i have 2005 pacifica also....power seats have stopped working...but windows...and locks work....i will try to disconnect battery to see if that brings anything back to life...thanks for the idea!!

(in reply to e49735)

Post #: 3