shift solenoid

Chrysler Forum Chrysler Classifieds Photo Gallery Member List Calendars Search Sponsors
Chrysler News Forum FAQ Contact CF Chrysler Recalls TSBs Timeslips Register Login

shift solenoid

Printable Version

Chrysler Forums >> Chrysler Vehicles >> Past Chrysler Models >> Cirrus & Breeze >> shift solenoid

Page: [1]

Message

<< Older Topic Newer Topic >>

shift solenoid - 4/16/2008 10:00:59 PM

kasandrahamilton

Posts: 7
Joined: 4/16/2008
Status: offline

i have a 2000 chrysler cirrus love the car. i was having a problem with my shifting at first i thought it was cause i was low on fluid so my husband put some in and it ran fine then it started not going into gear and my engine light came on so i took it up to auto zone and they ran a dioagnostic test for me. i found out it was the sift solenoid.... ok so my husband changed it and it ran fine went into gear perfectly. but now my problem is it leaks. i called a chrylser mechanic and he said that i don't need to tork it or put on sealent... ok i did that and it still leaked, so i put on sealent and it still leaks. it is leaking in a steady stream. does any one have any ideas please help. i really would have to get a new car cause i can't get it fixed i would just take it to a mechanic and get it fixed but i dont really have the money to do that. we'll try any ideas. except for stop leak alredy tried. thanks so much. Kasandra Hamilton

Post #: 1

RE: shift solenoid - 4/16/2008 10:15:31 PM

CHRYSLER TECH

Posts: 2101
Joined: 3/1/2006
From: Norcross GA
Status: offline

either A the gasket is messed up on install or B if u got a chryler sol pack U did not remove the metal plate that was on the old one and now u have spots that are not covered up.

_____________________________

11 Plus year Chrysler,Dodge,Jeep Tech I work at a dealer and I do side jobs in ATLANTA. KKeller608@aol.com
Master Electrical,Master Engine Performance,Master AC,
Master Body Mechanical,Master Brakes.2 year associates degree for Chrysler.

(in reply to kasandrahamilton)

Post #: 2

RE: shift solenoid - 4/17/2008 1:23:11 PM

moe

Posts: 667
Joined: 8/14/2006
Status: offline

ive seen the metal plate leakers,like tech said don't reuse the plate.also check and see how many metal stub type legs are on the old one verses the new one you may have to remove one of the three to make it work.moe

_____________________________

25 or so years exp.with chrysler,plymouth,dodge.jeep."A"tech at dodge /jeep dealership.living in N.J. "LET ME KNOW MOE!!

(in reply to CHRYSLER TECH)

Post #: 3

RE: shift solenoid - 4/19/2008 6:24:29 PM

kasandrahamilton

Posts: 7
Joined: 4/16/2008
Status: offline

thanks i will try that as soon as i know what you mean by the metal plate and the stubs where would they be?

(in reply to moe)

Post #: 4

RE: shift solenoid - 4/19/2008 10:33:37 PM

CHRYSLER TECH

Posts: 2101
Joined: 3/1/2006
From: Norcross GA
Status: offline

big metal plate to which u placed the sol pack on top of. The new CHrysler OE ones give instructions to remove the plate because if the different routing it takes and the plate gets in the way.

_____________________________

11 Plus year Chrysler,Dodge,Jeep Tech I work at a dealer and I do side jobs in ATLANTA. KKeller608@aol.com
Master Electrical,Master Engine Performance,Master AC,
Master Body Mechanical,Master Brakes.2 year associates degree for Chrysler.

(in reply to kasandrahamilton)

Post #: 5

RE: shift solenoid - 4/20/2008 1:19:18 PM

kasandrahamilton

Posts: 7
Joined: 4/16/2008
Status: offline

oh ok thanks a buch i will try that and let you know if it worked.

(in reply to CHRYSLER TECH)

Post #: 6

car jumps into drive after three seconds - 5/25/2008 12:11:15 PM

kasandrahamilton

Posts: 7
Joined: 4/16/2008
Status: offline

WOO HOO i got my car to stop leaking but turns out that the roll pins were just not seated enough into the solenoid go figure. ne hoo now i'm havin a diff problem. when i put my car into drive it takes three seconds to respond. i checked the fluid level and it is right. also if it put it into any other gear it goes into it right away. when i drive it it shifts fine and when i come to a stop it goes right away. so now i have no idea what could be wrong. just that it takes three seconds to go into drive or third or low. i did it like 10 times in a row and each time it took three seconds. please help

(in reply to kasandrahamilton)

Post #: 7

RE: car jumps into drive after three seconds - 5/27/2008 3:08:54 PM

CHRYSLER TECH

Posts: 2101
Joined: 3/1/2006
From: Norcross GA
Status: offline

could be the sol pack u got if its an after market one or need to perform a quick learn from a dealer or try this from a dead stop floor it all the way into 3rd gear the cvi's update them self at that time.

_____________________________

11 Plus year Chrysler,Dodge,Jeep Tech I work at a dealer and I do side jobs in ATLANTA. KKeller608@aol.com
Master Electrical,Master Engine Performance,Master AC,
Master Body Mechanical,Master Brakes.2 year associates degree for Chrysler.

(in reply to kasandrahamilton)

Post #: 8