heater wont turn off
Login | |
|
heater wont turn off - 7/26/2008 7:44:44 AM
|
|
|
anthonyfear
Posts: 3
Joined: 7/26/2008 Status: offline
|
hi all any ideas why my heater won''t turn off? I''ve got the digital type heater controls on my 96 concorde lx. Temp controls seems to work fine as do the direction buttons. My speed dial doesn''t seem to work properly and the off button - although it turns the display off, it doesn''t stop the blowers! Any help would be appreciated. Anthony
|
|
|
|
|
|
RE: heater wont turn off - 7/31/2008 4:26:49 PM
|
|
|
LHS
Posts: 1
Joined: 7/31/2008 Status: offline
|
You likely have a bad ATC head unit (ATC=Auto Temp. Control) Here is how to check: 1) Start Vehicle 2) Set the temp to 75 deg. 3) Press and hold floor,mix, and defrost at the same time until display starts to flash. (this also recalibrates the mode doors) 4) If codes are present, only one code will show at a time. To toggle through codes press the bottim left button. Description of codes: 23=A/C Blend door feedback failure 24=A/C Mode door Feedback failure 25=Ambient Sensor 26=ATC In car sensor 27=Sun Sensor Failure 31=A/C Recirculation Door stall Failure 32=ATC Blend Door Failure 33=ATC Mode Door Failure 34=Engine Temp Message not Recieved 35=Evaporator Sensor Failure 36=ATC Head Communication Failure To clear codes: Remove negative battery cable for 15-20minutes. I would bet from the problem you are describing, that you will get code 36. Easiest fix is to go the local junkers and grab a new/used head for a few bucks.
< Message edited by LHS -- 7/31/2008 4:27:23 PM >
|
|
|
|
RE: heater wont turn off - 8/5/2008 5:42:27 PM
|
|
|
anthonyfear
Posts: 3
Joined: 7/26/2008 Status: offline
|
wow - thanks very much. Will try it out tomorrow. FYI - I picked up a new control unit from junk yard on weekend but it didn''t make a difference!! I was hopeing it was just the speed dial that had gone faulty. Do I have to reprogram the new unit for it to work?
|
|
|
|
RE: heater wont turn off - 8/9/2008 6:13:16 AM
|
|
|
anthonyfear
Posts: 3
Joined: 7/26/2008 Status: offline
|
OK I tested unit as described by LHS (many thanks for that) and it did indeed return error 36 (Faulty ATC Head). So I replaced unit with one from junkers yard and now when testing unit I get no error codes. However I still can''t control blower speed or switch it off! Any other ideas?
|
|
|
|
Today's Posts
Most Active Topics
Make A Donation
Forum Rules & FAQ
RSS Feeds
Chrysler Prices
Chrysler
Chrysler 300c SRT8
Chrysler 300c
Chrysler 300
Chrysler Pacifica
Advertising Info
|
Contact Us |
Advertising |
Automotive Directory |
Archive |
About Us |
Link To Us |
Chrysler Links |
Legal |
Privacy Policy |
© Chrysler Forum
Chrysler Forum .com is not affiliated with or endorsed by Daimler Chrysler.
|