changing wheel studs on a 92 lebaron

Chrysler Forum Chrysler Classifieds Photo Gallery Member List Calendars Search Sponsors
Chrysler News Forum FAQ Contact CF Chrysler Recalls TSBs Timeslips Register Login

changing wheel studs on a 92 lebaron

Printable Version

Chrysler >> Chrysler Vehicles >> Past Chrysler Models >> K-Cars >> changing wheel studs on a 92 lebaron

Page: [1]

Message

<< Older Topic Newer Topic >>

changing wheel studs on a 92 lebaron - 9/9/2006 1:06:09 PM

dws

Posts: 1
Joined: 9/9/2006
Status: offline

i need to find out how to change the front wheel studs on a 92 lebaron sedan.

thanks

Post #: 1

RE: changing wheel studs on a 92 lebaron - 7/19/2008 11:17:19 AM

chief

Posts: 4
Joined: 7/19/2008
Status: offline

First you remove the wheel, remove caliper guide pins then remove the brake caliper, suspending it from the coil spring. Next remove the rotor (may have to remove retainer washers). You then remove the cotter pin, keeper and axle nut. The axle might need tapping out thru the hub/bearing center hole then remove the hub. This you will probably need to take and have the old lug removed and new one pressed into the hub. Replace in opposite order you removed.

(in reply to dws)

Post #: 2