300m Power seat transplant help
 

Hi folks,

I hope I do not upset anyone however I need to solve a problem. I was not sure where to post this here in the 300M section or in the interior section.

First off I am rebuilding a 1956 Chevy truck. I know this is a Chrysler forum however I purchased a pair of what I believe is a set of 300M seats with power, memory, and heat. I have a 2005 Town & Country and I can not beat the comfort and came across these seats and knew that's what I wanted in my old truck.

The seats are complete with the wiring connections, memory module, motors and switches. I am not sure of the year however the bottom of the seat I traced back a Chrysler part # 04760769AC / 16233AH on the main wiring harness that goes into the 2 connectors, a 22 pin connector and a 2 pin connector that operates the driver’s side seat. All the motors say Gen II B and one says GEN IIB Vert. , Memory 8-82496, 5709820 N3/4/99 17:10:17. The last other identification is a Johnson Control/Orangeville Ont L9W sticker along with Part: 0SN711K9AD, Trim: K9TLPP-P, and SEQ: *3981630*.

The passenger’s seat has the seat motion controls and hi-low heat. The passenger’s seat has a white 7 pin connector and a black 2 pin connector.

Today I went to the junk yard and pulled out a BCM and junction block combo with all the connectors, fuses and relays from a Chrysler 300M with the date of manufacture is 4-00.

I wish to hook up all the functions I can as far a seat movement, memory and hi and low heat. Does anyone have a wiring diagram or know what pins/color of wires does what?

So all I need now is how to hook the thing up to make it work. Any help is appreciated.

Thanks in advance,
Jaime