Chrysler Forum - Chrysler Enthusiast Forums - Chrysler Town & Country 2001

Chrysler Forum - Chrysler Enthusiast Forums (https://www.chryslerforum.com/forum/)

- Audio/Visual Electronics (https://www.chryslerforum.com/forum/audio-visual-electronics-36/)

- - Chrysler Town & Country 2001 - European Radio Frequency Step Change (https://www.chryslerforum.com/forum/audio-visual-electronics-36/chrysler-town-country-2001-european-radio-frequency-step-change-14792/)

Chrysler Town & Country 2001 - European Radio Frequency Step Change

Hello,

Does anyone know how to change the frequency steps of the fm radio in a Chrysler Town & Country or alike. The problem is here in Europe they use a frequency step of 0.1MHz instead of 0.2MHz. This means that I'm unable to listen to a lot of radio stations.
I found the following instruction on the web, but they are not for the 4G generation. I don't have a SEL button.

Quote:

1) Turn radio on.
2) Radio should be in FM mode.
3) Press SET button.
4) Press SEL button.
5) Press station memory set button one 5 times. Radio will reset to lowest AM frequency.
6) To return to North American reception repeat steps 1 - 5 or disconnect ignition off power source to radio.

Thanks!