2008 Sebring Door Locks
My driver door on my 08 sebring convertible will not lock. when the lock button is hit the lock will move but will not go all the way down and lock nor can you push the lock down.....HELP:confused:
|
Replace the latch.
|
Check to see if your vehicle is involved in Recall G33 (Front Door Latch Cables)
You can access the self-service recall site on the internet to check on your vehicle's involvement in any recall campaign that is published. Simply go to the Chrysler brand website Owners page: http://www.Chrysler.com/en/owners and enter your Vehicle Identification Number (VIN) where appropriate. The front door latch cables on some 2008 Sebring vehicles may become unseated from the interior release handle housing during certain operating conditions. This can cause the door latch to stick in the unlatched position or allow the lock function to become inoperative. A latch cable retaining clip must be installed on the right and left front door interior release handle housings. |
All times are GMT -5. The time now is 08:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands