I have a 2011 Chrysler 200 with a 3.6L and over the last several months it has stalled while driving and will then crank but no start. My Wife was driving each of the 3 times it has done it and says it just dies no warning doesn't act like it runs out of fuel. The first time the only thing I could think of was to disconnect the battery negative cable and hook it back up. It started right up and then was fine for weeks only to happen again. Same thing disconnect battery and start every time. Of course when you do this there is no code even if it set one, Any ideas on this? I am a Chrysler tech but cannot find any info on this. Thanks for your help

WV Jeepr

 

Clogged fuel filter?

Symptoms would be:
No codes
Runs okay at idle and slow speeds
Stalls at faster/highway speeds
Starts back up after short time while fuel seeps through

Happened to me many years ago.

 

only thing is it starts as soon as you remove the negative battery cable and reinstall it. Seems like a module is resetting once power is removed.

 

If it's a module issue, I would expect a code to be thrown..

 

Yeah I would think so but unfortunately I have not been able to scan it before having to get it out of the middle of the road. I'm starting to think WIN module. But that's a stab in the dark. I would love for it to not start and be off the road. LOL never happens. I drove the car 300 miles a couple days before and it ran great. Thanks for the help.

WVJ