Chrysler Crossfire & Crossfire SRT-6 The base model offers a coupe, convertible, or roadster, but regardless of the model chosen this luxury sports car offers pure driving enjoyment and for those who want a few extra ponies under the hood the supercharged model offers the driver 330 hp

2005 Crossfire Stalling without warning

Thread Tools
 
Search this Thread
 
  #1  
Old 11-05-2010, 04:47 PM
SJohnson's Avatar
Junior Member
Thread Starter
Join Date: Nov 2010
Posts: 3
Default 2005 Crossfire Stalling without warning

3 times in the last 5 weeks the engine has completely shut down without warning (once going 75 mph on the highway and the other 2 times at a stoplight). Once I coast to a safe stopping point, I have to put the car in park, turn off the ignition and restart, which it does immediately. I have taken it into Carmax and a Chrysler dealership and they cannot find anything wrong or recreate the problem. This is such a safety hazard I am afraid to drive my own car :-( Please help!!
 
  #2  
Old 11-05-2010, 09:16 PM
CHRYSLER TECH's Avatar
Super Moderator
Join Date: Mar 2006
Location: Norcross GA
Posts: 8,789
Default

no codes where in the computers? Which carmax did u take it to?
 
  #3  
Old 11-09-2010, 09:01 AM
SJohnson's Avatar
Junior Member
Thread Starter
Join Date: Nov 2010
Posts: 3
Default

Both Carmax (at Garland, Texas) and the Chrysler dealership both said that there were no stored error codes in the computer. One mechanic suggested that when I restarted the car that the error code could have been reset.
 
  #4  
Old 12-14-2010, 07:49 PM
starpartsguy's Avatar
Junior Member
Join Date: Dec 2010
Posts: 1
Default 2005 Crossfire Stalling without warning

engine crank sensor ? , was the car hot ?
 
  #5  
Old 12-15-2010, 06:48 PM
TNtech's Avatar
Senior Member
Join Date: Jul 2010
Location: Tennessee
Posts: 1,234
Default

Was the car warmed up every time this happened?
 
  #6  
Old 12-28-2010, 01:21 AM
VQ35DE's Avatar
Junior Member
Join Date: May 2006
Location: UNION CITY, TN
Posts: 4
Default

TNtech,
Hey I live in TN and have a 2008 Crossfire but NONE of the Chrysler dealers around here were ever Crossfire dealers so I have no Crossfire Techs either. What city/dealership do you work at because I may need you to work on it ? No dealerships around me will even touch them. That really sucks.
 
  #7  
Old 02-03-2011, 10:31 PM
magneticred's Avatar
Junior Member
Join Date: Aug 2007
Location:
Posts: 12
Default

Sounds like the crankshaft position sensor. Check these two discussions of the CPS and RCM:

http://www.crossfireforum.org/forum/...on-sensor.html

http://www.crossfireforum.org/forum/...-no-start.html
 
  #8  
Old 02-04-2011, 09:20 AM
SJohnson's Avatar
Junior Member
Thread Starter
Join Date: Nov 2010
Posts: 3
Default

well after being in the shop 5 times, Carmax took it to another dealership who replaced the crankshaft sensor and 2 other sensors and so far so good. fingers crossed!
 
  #9  
Old 02-08-2011, 08:27 AM
aloneuniv's Avatar
Junior Member
Join Date: Feb 2011
Posts: 1
Default

lit seems like a big trouble
 
  #10  
Old 12-17-2011, 10:26 AM
Anneg's Avatar
Junior Member
Join Date: Dec 2011
Posts: 2
Default

I had the sensor modual replace. Not sure what it is but I was told it was the diagnostic brain. That fixed the problem 5 years ago on my 2004.
 


Quick Reply: 2005 Crossfire Stalling without warning



All times are GMT -5. The time now is 02:23 AM.