Aftermarket stereo in 06 Pacifica
 

Hey guys, I just bought a new stereo for my wifes car and I bought the scosche install wiring kit. Everything is hooked up and the stereo turns on and works but there are no speakers. I can hook up a stand alone speaker and it works. I read about the amp in the rear but the wire
they claim to be the amp wire isn't in the dash. How do I power up the amp to get speakers?

Pink /orange wore is fuses accessory relay output Tie the blue amp wore to it.

Thanks I'll try this tonight.

Welp that that didn't work. Any other ideas?

what other wires dont u have being uses on the factory side?

that is 12v key on power. Where is the amp located? I tore up the back panels on the right and there is no amp back there.

orange/cream cream/purple green(maybe)/orange

orange and tan is panel lamp driver which u wont use. OK chec fuses for the amp then

Amp is fine as I keep putting the stock radio in it so my wife will have a radio till I figure this out. Now this morning I got a U110a code. That states no comm. between the BCM and steering wheel controls. will this persist with an aftermarket radio in it?

yep because u dont have radio controls for the aftermarket one.

Wires
 

Did you ever figure out how to get the amp on. I'm having the same problem