My new 2008 PT stalled! Only had it for 2 weeks!
Hi all--
Two weeks ago hubby and I bought a low mileage 2008 black PT, auto, and had a fab time bombing around in it. We added wide white walls with black rims and chrome rings to match our 1941 black Chevy. Life was super-fine until the PT stalled. The 41 Chev? no problem--it never stalls The PT '08? 2 weeks old? Yup, it stalled and would NOT start! Our PT turned over and started for 15 seconds or so and then stalled--this happened a couple of times and then when I tried it again, nothing! It has now been in the dealer's shop for 2 days--THEY can't figure it out! Battery and all lights are good--got that nasty engine light icon though. The car simply had no power, no turn-over, nothing. Like it died...with white walls to boot. WHY? The PT was parked, in the driveway overnight--Sooo glad it wasn't on the freeway or in a dark alley. Love my PT...Why is this happening? Does anyone have any ideas or advice? Estocanuck |
might be ignition of lack of fuel, does it atleast crank?
|
THIS BULLETIN SUPERSEDES TECHNICAL SERVICE BULLETIN 08-007-08, DATED
MARCH 04, 2008. THIS IS A COMPLETE REVISION AND NO ASTERISKS HAVE BEEN USED TO HIGHLIGHT REVISIONS. DO NOT ORDER PART NUMBER 05026070AP UNTIL JULY 21, 2008. ALL OTHER PART NUMBERS ARE AVAILABLE NOW. SUBJECT: No Engine Crank Or No Engine Start Due To Electronic Lockup Of The WCM / SKREEM OVERVIEW: This bulletin involves the replacement of the Wireless Control Module (WCM), and if equipped, the replacement of the Electric Steering Column Lock (ELV). The WCM is also referred to as the Sentry Key Remote Entry Module (SKREEM). MODELS: 2007 - 2008 (DR/DH/D1/DC/DM) Ram Truck (1500/2500/3500/4500/5500) 2007 - 2008 (JK) Wrangler 2007 - 2008 (J1) Sebring (China) 2007 - 2008 (JS) Avenger/Sebring 2007 - 2008 (KA) Nitro 2008 (KK) Liberty/Cherokee 2007 - 2008 (MK) Compass/Patriot 2007 - 2008 (PM) Caliber 2006 - 2008 (PT) Chrysler PT Cruiser NOTE: This bulletin applies to vehicles built on or before May 05, 2008 (MDH 0505XX). SYMPTOM/CONDITION: The customer will experience a no engine crank AND a no engine start condition. Also, the remote keyless entry (RKE) system will not operate. This condition may be due to an electrostatic discharge (ESD) from the ignition key into the Wireless Control Module (WCM), causing the WCM to electronically lockup. This condition may occur more frequently in dry and/or cold weather conditions where a sufficient electrostatic charge is NUMBER: 08-007-08 REV. A GROUP: Electrical DATE: July 04, 2008 more easily produced. This condition is corrected by the replacement of the WCM. |
All times are GMT -5. The time now is 10:26 PM. |
© 2024 MH Sub I, LLC dba Internet Brands