chrysler town and country fuel rail
I'm putting on a new valve cover gasket on my 97 3.8 town and country. How do I take the fuel rail off to get the cover off. I'm just doing the front one.
Thanks! |
You dont have to take it off. Get a wobble socket.
|
I got all the bolts out but I could not get the valve cover off. Ill have tear in to it tomorrow. Thanks
|
You can take off the 2 13mm bolts that hold the front of it to the intake and pry a little, just enough to get the v/c out BUT be careful not to pry too much and cause a fuel rail leak.
|
Ok thanks for the help. Just curious how do I get the pipe that connects the 2 rails together off. I got the clamps off and the metal things that sandwich the pipe off but I could not get the pipe to pull out of the fuel rail. I know I don't need to pull that off but I just want to know how lol
|
The clamps were part of a recall to stop rail leaks. You don't take the rail apart, it's ONE piece.
|
O ok, thanks for the info!
|
All times are GMT -5. The time now is 03:56 AM. |
© 2024 MH Sub I, LLC dba Internet Brands