Electric sliding door/Aircon
 

Did a bit of research on here and the web and found my lack of an operating door could be down to the wires in the plastic chain, so remove chain and wires right from the front to the connection on the door, remove the sticky tape and replace wires one at a time, not too bad a job, all replaced and now door will open, but not fully shut, any one any further ideas? Please? It isnt going to beet me!!


On a previous post I mentioned the aircon had been regassed and still wouldn't work, turns out the shaft in the compressor has broken internally, the clutch still operates but the comp wont compress, so waiting for a second hand compressor to arrive.