stmiller96 |
05-16-2012 05:18 PM |
Update on my Town and country!
I replaced the camshaft, lifters, rebuilt heads, gaskets, timing chain and gears. Buttoned everything up and the van didn't run right, tripping the camshaft and crankshaft codes. I tried replacing the cam and crank sensors, but thought I might have installed the timing chain wrong (but was sure I did it right). Well today I tore back into it and found I did indeed install the timing chain and gears right. After looking carefully at the cam gear I found the timing notches were at different places from the original. Well thank you NAPA for selling me the wrong timing chain and gear set!!!!!!!!!
|