Chrysler Forum - Chrysler Enthusiast Forums

Chrysler Forum - Chrysler Enthusiast Forums (https://www.chryslerforum.com/forum/)

- General Tech (https://www.chryslerforum.com/forum/general-tech-11/)

- - 01 sebring convertible (https://www.chryslerforum.com/forum/general-tech-11/01-sebring-convertible-1420/)

sebringpower69

04-26-2006 07:20 PM

01 sebring convertible

ive got a 01 sebring lx convertible and when the top is up(closed) only the passenger corner seals completely causing horrible wind resistance on the driver side. what can i do to make it seal completely all around

CHRYSLER TECH

12-09-2006 04:27 AM

RE: 01 sebring convertible

adj the top on the driver side

sebringpower69

12-10-2006 02:24 AM

RE: 01 sebring convertible

how do i go about adj the driver side

CHRYSLER TECH

12-12-2006 02:03 AM

RE: 01 sebring convertible

ADJUSTMENTS - DOWEL PIN
Loosen dowel pins (ROOF LATCH AND GUIDE DOWEL PIN).
Position dowel pins to the center of the receiver holes in the windshield header.
Tighten dowel pins and verify adjustment.
NOTE: Refer to Cam Adjustment or Balance Link Adjustment paragraphs of this section to adjust forward or rearward position of the top header.

[IMG]local://upfiles/1033/23CD908B16554C539FFF2E9C6D582631.gif[/IMG]

All times are GMT -5. The time now is 03:12 AM.