Need help on my 02 300m
hello , I have a 02 300m and replaced the two lines from the master cylinder and can’t get a good brake pedal now . The lines go into the abs units . I’ve bleed all 4 wheels and went through 2 of the large sized bottles of dot 3 fluid . Any help would be greatly appreciated. Thanks |
need to bleed the abs unit need a scanner to turn on and off the abs unit to bleed each port.
|
thanks
Originally Posted by CHRYSLER TECH
(Post 107089)
need to bleed the abs unit need a scanner to turn on and off the abs unit to bleed each port.
|
All times are GMT -5. The time now is 05:30 PM. |
© 2024 MH Sub I, LLC dba Internet Brands