99 300m Power Seats Help Please
 

Hi guys i ran across the forums while searching for help online, so im new here but still hoping ill find some help and i do thank you in advance for any help. Ok im trying to get a set of 300m leather seats power and heat out of my local pick and pull yard. but as we all know they have to slide forward to unbolt the rear bolts. all these cars have no batterys and have been cut and so you cant just put a battery in them so i need to hook the power wires for movement to a battery inorder to get them to move enough to unbolt them. then later on ill figure out the wiring for putting them in my project as it wont be a direct swap. So can somebody please tell me what wires will give the seats power to move for me? Thank you so much for any help you can give.

as as ive been digging online now for 3 hours im learning that i need more than just the seats, seems to be modules and such that i need. So can someone also tell me everything you need to remove from the car basicly to hook two wires to a battery and make the seats work like they should? im putting these into a pickup so i need all the modules and wires so all i have to do is supply them with power and they will work. Thanks again im really hoping to get some input as i am trying to find my own answer but just not having any luck. Just dont want yall to think im looking for someone else to tell me how to do everything i just need some help as this is new to me.