Chrysler Forum - Chrysler Enthusiast Forums - 05 300c, po344, cam sensor issue. Wont start. Please help

Chrysler Forum - Chrysler Enthusiast Forums (https://www.chryslerforum.com/forum/)

- New Member Area (https://www.chryslerforum.com/forum/new-member-area-5/)

- - 05 300c, po344, cam sensor issue. Wont start. Please help (https://www.chryslerforum.com/forum/new-member-area-5/05-300c-po344-cam-sensor-issue-wont-start-please-help-31308/)

Scout369

Nov 5, 2019 07:24 PM

05 300c, po344, cam sensor issue. Wont start. Please help

Tried replacing sensor (autozone), will not start unless the pedal is half way down, and will not idle. You have to keep it at 1500-2000rpm to keep it running. Any help would be appreciated

CHRYSLER TECH

Nov 9, 2019 08:12 PM

Have a volt meter ?? measure the voltages at teh cam sensor

Scout

Nov 10, 2019 05:05 PM

Yes, 5v on end wires wires, middle is ground from what I understand

CHRYSLER TECH

Nov 13, 2019 11:08 AM

2 have 5v one ground? then volts are good. is that the only code coming up? anything else done to the car before hand?

All times are GMT -5. The time now is 05:08 AM.