2006 2.7L detonation sensor fastener
 

Hi there,
New to your forum, Thanks for granting me access to a fine Chrysler group.
Big question of the day! Have to install the detonation sensor back on the 2.7 project, Been to the machine shop and ready to put heads back on. This has the bolt through style sensor. It's been apart for a year, but don't remember if the fastener is the stud w/10mm-8-1.25mm and nut anchor or a regular style bolt/ washer. If one of you Techs or Members could shed some light on this I would very much appreciate any help so I can get this Sebring back into service. I have to put the right fasteners back where Chrysler had them. Just the way I would like it to be. Thanks for any Help! Maxie1.