sebring cranks but wont start
Hello new to forum, have been reading and love this useful site..... I just purchused a 01 sebring lxi, the person i boughty the car from tore the engine apart which was a 2.7.. I did a engine swap using the harness from orginal engine in car, i have changed ckp, cam shaft, vss sensor. I have also check 2 see if asd was trip it isnt. i have fuel coming to injectors, i have current to the connector that goes into the coil, but i have no spark at the plug.. the engine cranks, it will want to kick over if i spray starting fluid in tb.. but without the starting fluid it just cranks.. i need help bad it has been driving me crazy for the last to weeks.. all fuses are good and not blown.....someone PLEASE HELP...
|
unplug the cam sensor let me know if it will start
|
i tried that b4 i changed the sensor nothing, it did the same thing.
|
u tried to unplug the cam sensor and still not start ??
hold it over for say 10 seconds |
i unplugged the sensor and nothing cranked but did not fire. I also changed camshaft sensor nothing. i have codes p0340, p1193, p0725 and p0700. i know anything is possible but do thing pcm needs to be rebooted?
|
hey tech i just found out that i have a 04 sebring engine. it is not a 01 a thought. any sugesstions
|
as I was saying if the cam sensor is unplugged it will start up due to the fact that U have a different engine installed and the wrong cam tone wheel.
|
hey tech did everything that u said and still have no spark what else could it be?
|
All times are GMT -5. The time now is 03:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands