Dual Climate Control no heat on Passenger Side
Hello,
So, my 1997 Town And Country LXI has a switch that allows the passenger and driver to change the temperature of the air/heat, however recently the Passenger side only blows cold when it's on full heat. I think it is probably either the Vent Door Actuator, or the Vent Door itself, is there an easy way to test and figure out which? I don't really want to tear apart the dash board if I don't have to, any assistance would be greatly appreciated! Thanks! Phil |
the motors are on the driver side near the gas pedal move the knob and see if the doors are moving along with the motors.
|
so have someone move the Heat/Cool levers and see if the motors are moving, where could you tell if the doors are moving?
|
read the first 11 words of my post
|
ok gotcha, I know at least one motor is moving, because the Drivers side works just fine.... I will test that out tonight.... thanks!
|
All times are GMT -5. The time now is 02:52 PM. |
© 2024 MH Sub I, LLC dba Internet Brands