need to relocate the temp sending unit
#1
need to relocate the temp sending unit
I am putting a 2005 3.5 into a 2003 300m I am in the process of tearing both motors down to swap parts from the 2003 so it will fit correctly in the car. I need to move the coolant sensor on the 2005 block that is located next to the crank pulley as the 2003 uses a larger pulley and the sensor is in the way. Is there another location that may have a plug in it I can use to mount the sensor. The wiring on the 2003 is on the front of the drivers side so the port need to be in that area.
Thread
Thread Starter
Forum
Replies
Last Post
Stuart Irwin
General Tech
1
07-16-2013 10:02 AM