I have a 2007 Aspen and have been told that the outer tie rod is wearing. When searching online I have found few options for the Chrysler but a lot of choices for a 2007 Durango. My thought is that these two cars are basically identical underneath and if I can find a premium part for the Durango it should be a direct bolt in for the Aspen. Correct?

Thanks,

Eric

 

Mechanically, the vehicles are practically identical, so I would expect basic parts to be interchangeable.

 

As long as the same year, drivetrain, etc. they should be identical.

 

Glad to see someone else having the same problem as me on my 2007. We just replaced the driver's side outer tie rod on ours. Just buy the part from the Stealership. It was only $45 for the tie rod. Just make sure you get the vehicle aligned afterwards.