Need help 2005 PAcifica 3.8

Reply Subscribe

Thread Tools

Search this Thread

07-22-2010, 01:47 PM

Kendegreat

Junior Member

Thread Starter

Join Date: Jul 2010

Posts: 3

Need help 2005 PAcifica 3.8

I have a major problem,

I can't find a manual to work on my wifes 2005 Pacifica with a 3.8.... We bought it used with about $45,000.00 miles on it.

To make a long story short Check your oil at least once or twice a month.... We have had no problem with our pacifica until it started knocking, THe Oil light never came on and there was no oil leaking... Of course my wife did check the oil and I had to put a rebuild crank case with bigger bearings.

Now here is my problem... DOn't laugh, I took pictures of everything except how the belt goes on and were the Idler Pulley mounts on that big pieces of Aluminum. Can someone take me a picture of how the belt runs and where the idler pully goes Please

Ken

Does anyone know were to get a manual

07-23-2010, 06:13 AM

Virglijus

Junior Member

Join Date: Jul 2009

Location: Lithuania

Posts: 28

I have a manual, but do not know how to insert the picture here

Last edited by Virglijus; 07-23-2010 at 06:20 AM.

07-23-2010, 08:36 PM

busboy4

Senior Member

Join Date: Aug 2009

Posts: 223

I can shoot you a picture of it if you post your email here or on a private message. The file is too big to post here as we are limited to an amazingly small 19kb or there abouts.

07-25-2010, 07:20 AM

Kendegreat

Junior Member

Thread Starter

Join Date: Jul 2010

Posts: 3

I tried to send you a private message but the board said I don't have acess. A very nice K Keller sent me this picture. Thanks everyone

- DRIVE BELT
2 - POWER STEERING PUMP PULLEY
3 - BELT TENIONER PULLEY
4 - IDLER PULLEY
5 - GENERATOR PULLEY
6 - AIR CONDITIONING COMPRESSOR PULLEY
7 - CRANKSHAFT PULLEY
8 - WATER PUMP PULLEY