I've bought a pair of ghost shadow lights and I want to install them in my 2008 Chrysler pacifica lx 4.0 awd. I know how to disassemble and assemble the door but I don't know which cables I should connect the lights to. Anyone can help me with that?

 

buy a wire diagram for your car and u can see the wire colors for each door in the loom

 

You just need to know power/ground on the door light. Here is a video:

 

Hi, thanks , where can I get one?

 

Hi, thanks for the help. I've checked that but I just have reflectors on my doors, not lights

 

Oh ok sorry.

Well, the interesting thing is, you need a power source that is only "live" with the door open, and you need that power delivered to the bottom of the door. Do you have interior under-dash floor lighting that comes on when the door opens? You could tap power and ground there, but you would then need to fish the wires through the door jamb wire conduit into the door and down to your new lights. So if you applied the video principles to an interior light and went from there I think you might have a solution. Be sure and secure the added wiring in the door where it is well clear of the window track. I have seen hap hazard speaker wiring broken by the window.