I work on cars alot so I am not a novice. My question is I replaced the following brake components on my Voyager and now I have a shimmy when I apply the brakes. It appers to be worse around 35 mph.

Rear replaced everything including the backing plates.
Front replaced rotors and pads.
Bled both front and back.

Shimmy feels like it's in the front drivers side. When I apply brakes the car tracks true. (No left or right pull)

Checked both rotor runout, on car, with dial indicator. Both were within .001

Replaced both front rotors and pads again anyway still have shimmy.

Any suggestions ????????

 

Might want to look at the tie rod ends for looseness.