problem i have is my mirrors fold in as they should but when i press the button to fold them back they fold out all the way round past where they should stop there doesnt seem to be any resistance at the stop point so they carry on .... are these mirrors scrap or is there a fix

 

Hi
I have the opposite problem-----when I power them in, they really don't want to go back out---(one of them anyway)
Nigel

 

This often happens not as expected with software or stepper motors, but simply that they were taken off [open] and replaced [closed] in a different attitude.

 

So is there any thing I can try

 

You may have to get inside the mirror and wind back the mechanism manually or electrically and set it according to what the car thinks the position its in.

 

Temporary fix I did...flick switch to fold in, then back out... hold mirror at desired central position and it should click into locked position. Still can't figure out why?!

 

Hi everyone can you tell me is thre a glow plug in the cabin heater under the passages footwell

 

There certainly will be one, but you need to know which particular one. Read this for ideas, its all in here my friend.

 

And here's what it looks like, plenty on Flee-Bay but do they work. Other pic is the firing end opposite heat exchanger.