My rear parking assist indicator in the headliner of my 05 Town and Country was knocked loose. While trying to reinstall it, the 3 wires pulled out of the plug on the drivers side of the led assembly. Can someone please tell me what order those wires go back into the plug starting from the rear of the vehicle and going forward? Pulling what's left of my hair out trying to find a wiring diagram for this "simple" repair!

 

My manual is missing a picture for this connector but if the plug is numbered, this may help

1 DG/GY PARK ASSIST DISPLAY SUPPLY
2 GY/BK GROUND

3 WT/GY PARK ASSIST DISPLAY SIGNAL

DG Dark Green
GY GREY
BK BLACK
WT WHITE

 

Thanks, I'll get my volt meter and see if I can work it out from there. That's way more than I could find with several hours of searching yesterday.

 

Found the numbers on the mini plug. Installed the wires in that order, and the indicator works great. Thanks for the help!

 

Glad to help

 

any idea where I can find the plug/connector? Mine was broken off by previous owner so I have the loose wires plus the display module but the plug is missing - Help!!??

 

2021 and you just saved another member thank you legend