General Tech Good at troubleshooting? Have a non specific issue? Discuss general tech topics here.

94 Concorde low/high beam issue

Thread Tools
 
Search this Thread
 
Old May 10, 2009 | 09:10 PM
  #1  
Jack777's Avatar
Thread Starter
|
Junior Member
Joined: May 2009
Posts: 2
Default 94 Concorde low/high beam issue

Just acquired a 94 concorde that doesn't seem to have low beams. There is no difference between the DRL and when I turn on the headlights. When I put the e-brake on and the running lights go off I turn on the headlights and get nothing. The previous owner says thats how they are just really dim I find that hard to believe. Another thing is when I pull back on the high beams they work and then as soon as i let go they go off. Is there no high beams that stay on on this vehicle ??

Thanks

Kevin
 
Old May 11, 2009 | 10:46 PM
  #2  
dcotter0579's Avatar
Senior Member
Joined: May 2008
Posts: 5,649
From: Detroit suburb
Default

Try pushing the lever away from you rather than pulling it toward you. The pull is for a flash, pushing away clicks them on.
 
Old May 12, 2009 | 07:15 PM
  #3  
Jack777's Avatar
Thread Starter
|
Junior Member
Joined: May 2009
Posts: 2
Default

I found the problem it was the light switch on the dash contacts were worn replaced the switch and everything is fine. On the 94 you pull back for highbeams they now stay on and low beams work too
 
Old May 13, 2009 | 03:04 PM
  #4  
dcotter0579's Avatar
Senior Member
Joined: May 2008
Posts: 5,649
From: Detroit suburb
Default

Good work.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
nov_284
Chrysler Voyager & Town & Country
5
Nov 6, 2012 12:20 PM
captdantan
Chrysler 300, 300C & 300C SRT-8
3
Feb 6, 2012 10:56 AM
lmekic06
Chrysler 200 & Sebring
0
Nov 13, 2011 03:52 PM
leortiz
Other
0
Sep 5, 2011 02:37 AM
ajs42548
Chrysler Voyager & Town & Country
6
Jan 19, 2011 01:45 PM




All times are GMT -5. The time now is 01:48 AM.