New Member Area New to CF? Stop in tell us about you.

Chrysler

Thread Tools
 
Search this Thread
 
  #1  
Old 05-16-2015, 09:29 PM
Pastor's Avatar
Junior Member
Thread Starter
Join Date: May 2015
Posts: 4
Default Chrysler

I recently replaced my ecm on a Chrysler 300 2007 2.7 V6 it was flashed for my car, when I installed it every thing works except ac\heater control, the old ecm was shorted is it possible that the short may have blown the ac\heat control unit, all fuses has been checked. Please help
 
  #2  
Old 05-16-2015, 11:15 PM
CHRYSLER TECH's Avatar
Super Moderator
Join Date: Mar 2006
Location: Norcross GA
Posts: 8,789
Default

no they have nothing to do with each other
the PCM is for the engine and transmission only.
 
  #3  
Old 05-17-2015, 05:58 AM
Pastor's Avatar
Junior Member
Thread Starter
Join Date: May 2015
Posts: 4
Question

Originally Posted by CHRYSLER TECH
no they have nothing to do with each other
the PCM is for the engine and transmission only.


Have you any ideas to why the AC\heat wont engage, the Climate control only partly lights up.
 
  #4  
Old 05-17-2015, 06:01 AM
Pastor's Avatar
Junior Member
Thread Starter
Join Date: May 2015
Posts: 4
Default

Originally Posted by Pastor
Have you any ideas to why the AC\heat wont engage, the Climate control only partly lights up.
Sorry that was the ECM not PCM. that shorted
 
  #5  
Old 05-17-2015, 10:08 PM
CHRYSLER TECH's Avatar
Super Moderator
Join Date: Mar 2006
Location: Norcross GA
Posts: 8,789
Default

ECM and PCM are the same thing. Try jumping the ac clutch relay pin 30 and 87 make the clutch come on with teh car running that will tell teh PCM that u have ac.
 
  #6  
Old 05-17-2015, 10:40 PM
Pastor's Avatar
Junior Member
Thread Starter
Join Date: May 2015
Posts: 4
Thumbs up

Originally Posted by CHRYSLER TECH
ECM and PCM are the same thing. Try jumping the ac clutch relay pin 30 and 87 make the clutch come on with teh car running that will tell teh PCM that u have ac.
Thank you I have discovered to problem, there is a relay in the front fuse box replaced that and every thing started to work, once again thank you
 




All times are GMT -5. The time now is 07:53 AM.