Chrysler Forum - Chrysler Enthusiast Forums - New Member - 2004 Sebring GTC - 6cyl - 2.7l

Chrysler Forum - Chrysler Enthusiast Forums (https://www.chryslerforum.com/forum/)

- New Member Area (https://www.chryslerforum.com/forum/new-member-area-5/)

- - New Member - 2004 Sebring GTC - 6cyl - 2.7l - crank but no start (https://www.chryslerforum.com/forum/new-member-area-5/new-member-2004-sebring-gtc-6cyl-2-7l-crank-but-no-start-26562/)

CoolDaddy

09-24-2016 10:52 PM

New Member - 2004 Sebring GTC - 6cyl - 2.7l - crank but no start

2004 Sebring GTC - NO codes - crank but no start - no signal to crank shaft position sensor. Likewise no injector pulse to three of six injectors. Do have power to fuel pump and cylinder heads pressure read good on all 6 cylinders. The car has spark at all 6 ignition coils.

ASD Relay is Good, and all fuses are good!

prkhilldwlr

09-29-2016 10:47 AM

When you say no signal to the Cranks Position Sensor do you mean from? If there is no CPK signal there will be no start, a bad CPS (camshaft position sensor) will cause misfires or bad drive-ability and set a code.

CHRYSLER TECH

09-30-2016 11:46 AM

was anything done before it would not start up? any one work on it?

All times are GMT -5. The time now is 05:49 PM.