2004 Sebring GTC - NO codes - crank but no start - no signal to crank shaft position sensor. Likewise no injector pulse to three of six injectors. Do have power to fuel pump and cylinder heads pressure read good on all 6 cylinders. The car has spark at all 6 ignition coils.


ASD Relay is Good, and all fuses are good!

 

When you say no signal to the Cranks Position Sensor do you mean from? If there is no CPK signal there will be no start, a bad CPS (camshaft position sensor) will cause misfires or bad drive-ability and set a code.

 

was anything done before it would not start up? any one work on it?