98 Concorde 3.2
No start :( she drove it home yesterday. Engine turns over but that is it. Had a code back in june.. Code PO306 replaced all the spark plugs and one coil pack. I just put in a fuel pump relay. Still won't start :( Ideas?
|
missing spark or fuel see which one
|
No spark. Just got the chance to check!
|
No power to 2-20 amp fuses in fuse and relay center. 20 amp inj/coil and 20 amp ASD
|
Anything?
|
ok which fuses there are many 20 amp fuses
|
The ones listed above ASD and
|
helps out zero not infront of the car to see this. look under the cover and tell me what the fuses are designated to
|
The 2 20 amps on lower left. https://i179.photobucket.com/albums/...A6E15620D4.jpg
|
the asd only has power on it when the car is running or it is starting it will not supply power to the injectors or coil unless it cranking.
|
Well any ideas on the no spark issue?
|
how did you check for no spark?
|
Volt meter probes in coil packs.
|
mmm thats not going to work. unless you volt meter is fast enough and can handle 50,000 volts it wont tell u anything.
Get a spark tester for auto zone or someplace like that for like 15 bucks will need the long tube adapter then it will plug into the coil then flash a lite as the engine is sparking teh plugs. |
Tested with key on and no cranking! No power to coil packs. Can you put plug in coil pack to test for spark? Auto zone had no spark testers.
|
u wont have power to coil pack unless the car is cranking or running thats what teh asd relay does, yeah u can u need to ground teh plug and dont get zapped
|
No spark! Picked one of these up.
<embed width="600" height="361" type="application/x-shockwave-flash" allowFullscreen="true" allowNetworking="all" wmode="transparent" src="http://static.photobucket.com/player.swf" flashvars="file=http%3A%2F%2Fvid179.photobucket.co m%2Falbums%2Fw309%2FSean_TX%2F3D381018-5854-4971-97E7-BB9FB7C1A041.mp4"> |
|
It was crankshaft position sensor.
|
All times are GMT -5. The time now is 07:00 PM. |
© 2024 MH Sub I, LLC dba Internet Brands