Go Back   Chrysler Forum - Chrysler Enthusiast Forums > Chrysler Vehicles > Chrysler Pacifica
Sign in using an external account
Register Forgot Password?

Welcome to the Chrysler Forum - Chrysler Enthusiast Forums.
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Reply
 
 
 
 
LinkBack Thread Tools Search this Thread
  #1  
Old 08-27-2011, 08:08 PM
Junior Member
 
Join Date: Aug 2011
Posts: 2
Default tranny/ transfer case problem

i got an 04 chy pacifica it wont go any faster then 70km/h max. when i try my code reader i get a p0700. last time i took it out it only got to 35km/h max. it will not rev more then 3500rpm i have ran it up on a hoist and when do i hear a loud clunk and knock from the front transfer case/ front diff it sounds like a bunch of bolts or gears in there just being thrown everywhere. i have thought it was a plugged cat i took off the pre-cat o2 of with no such luck it will run fine some times on the hoist with no load on the tires. i have yet to take apart the front diff in worry to have it stuck on the hoist for good and cant make it move able. any ideas out there. some days it drives better then others. i can have my foot to the floor but have no power and only stay at 1500rpm, and at that rev it sounds like the whole thing is ready to blow up. any ideas out there
This ad is not displayed to registered members.
Register your free account today and become a member on ChryslerForum!
Reply With Quote
  #2  
Old 08-27-2011, 08:34 PM
TNtech's Avatar
Senior Member
 
Join Date: Jul 2010
Location: Tennessee
Posts: 1,128
Default

You have an internal trans issue..probably major. The car is in limp-in mode. Stop trying to drive it or you will kill the engine too.
__________________
Chrysler-Jeep-Dodge Technician
Electrical & Driveablity
Crossfire
Reply With Quote
  #3  
Old 08-27-2011, 09:11 PM
Junior Member
 
Join Date: Aug 2011
Posts: 2
Default

i know its in limp mode any ideas what it could be?
Reply With Quote
Old 08-27-2011, 09:11 PM
 
 
 
Reply



Tags
300, case, chrysler, pacifica, problems, transfer

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Advertising

Featured Sponsors
Vendor Directory
Our Sponsors
All times are GMT -5. The time now is 01:19 AM.

© Internet Brands, Inc.

Powered by vBulletin® Version 3.7.5
Copyright ©2000 - 2012, Jelsoft Enterprises Ltd.
SEO by vBSEO ©2010, Crawlability, Inc.

Emails Backup