2006 Sebring limited convertible seat belt
#2
CUSTOMER PROGRAMMING SEQUENCE
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the programming to be completed successfully.
NOTE: The following sequence of events must occur within 60 seconds of the ignition switch being placed in the ON position in order for the programming to be completed successfully.
- With all doors closed and the ignition switch in any position except ON or START, buckle the driver side front seat belt.
- Turn the ignition switch to the ON position and wait for the seatbelt indicator reminder function to conclude (about six seconds) .
- Unbuckle and buckle the driver side front seat belt three or more times, ending with the belt buckled.
- Turn the ignition switch to any position except ON or START to toggle the BELTMINDER feature from its current setting (from active to inactive, or from inactive to active). A single chime tone will provide an audible confirmation that the programming sequence has been successfully completed.
Thread
Thread Starter
Forum
Replies
Last Post
telecros
Chrysler 200 & Sebring
1
03-20-2015 04:04 PM