Hi,

I have a 2011 Chrysler 200. I just had the blower motor replaced. Using the Auto Start, the car starts fine, but the blower does not kick on. I have tried with the fan speed on high or Auto, and the temp guage set to the hottest level, the blower does not kick on. Once I put the key in the ignition and turn it as if I am going to drive, the blower kicks on.

Cabin filter was changed at the same time the blower motor was replaced? I believe the actuator was changed as well because the clicking noise I have had since I bought the car in 2012, is no longer there and that was from the actuator in the glove box as well.

It worked prior to the blower motor being replaced.

Any idea what I can check to see why the blower doesnt kick on using the Auto Start on the key fob?

Thanks in advance for any information or advice
Joe